72模拟器

www.net130.com     日期:2006-10-16    浏览次数:
出处:互联网
 
发现了关于7200模拟器的两个外国论坛,挺不错.喜欢研究dynamips的朋友可以去看看
http://hacki.at/7200emu/index.php          (7200模拟器论坛)
Suggested approach with the DOiT labs under the simulated environment:
 
Look at the DOiT scenario diagrams and VLAN tables.
 
Make a list of all data links involved in the scenario.
Draw the new diagrams and modify the interface numbering (serial interfaces and fast Ethernet interfaces).
Create a network file for the scenario with the list of routers and Ethernet virtual switch. Configure access or trunk ports on the dynamips virtual Ethernet switch.
Replace ISL configuration with DOT1Q
Network files will be similar to the DOiT Sample scenario explained later in this document, as well as DOiT Scenario 1 network file attached in appendix B.
 
Modify the initial configuration scripts to reflect the changed interface numbers
 
Perform required configuration of the scenario on your routers.
 
Perform routing (IGP and BGP) configuration on the CAT1 and CAT2, as well as IOS features common to a cisco router and a cisco 3550 switch.
 
Compare results with the SHOWiT engine
 
Troubleshoot and verify with the TCL procedures supplied with the scenarios  in your portal.
相关新闻