F5 Active/Active 模式下双机的配置同步

www.net130.com     日期:2009-11-7    浏览次数:
出处:mycisco.cn

a/a模式下有相同的配置文件/config/bigip.conf,但是每个VS ,SNAT,SELFIP都是和单元号关联的

a/a模式下的同步除了要对同步进行基本的配置外,还需做以下工作:

1.关联 vs ,selfip address, snat 和机器单元号,如unit 1上的则关联到1 ,2上的关联到2

这一步是通过bigpipe 命令行做的

2.执行双向同步。

这一步可以通过配置工具来做

查看和关联的命令是:

VS相关命令:

b virtual address all show 显示所有VS的详细属性          b virtual address all unit show 显示所有概要信息

b virtual address ip-address show 显示具体的某个VS详细属性         b virtual address ip-address unit show 显示概要信息

 self ip相关命令

b self all show 显示所有selfip的详细信息      b self all unit show 显示所有概要信息

b self  ip-address show 显示具体的某个selfip详细信息              b self  ip-address unit show 显示概要信息

 snat相关命令

b snat translation all show 显示所有snat的详细信息    b snat translation unit show 显示所有概要信息

b snat translation ip-address show显示具体的某个snat详细信息  b snat translation ip-address unit show 显示概要信息

例:

[root@ltm:Active] config # b virtual address unit show
VIRTUAL ADDRESS any - unit 1
VIRTUAL ADDRESS 192.168.161.212 - unit 1
[root@ltm:Active] config # b virtual address  show
VIRTUAL any   MASK 0.0.0.0   UNIT 1
|        ARP: disabled
|        (cur, max, limit, tot) = (14, 2147, 0, 4.975M)
|        (pkts,bits) in = (867810, 4.172G), out = (601903, 1.095G)
+-> SERVER vs-forwording   SERVICE any
    |        PVA acceleration none
    |        (cur, max, limit, tot) = (14, 2147, 0, 4.975M)
    |        (pkts,bits) in = (867810, 4.172G), out = (601903, 1.095G)
    |        requests (total) = 44228
    +--> IP FORWARDING

VIRTUAL 192.168.161.212   UNIT 1
|        ARP: enabled
|        (cur, max, limit, tot) = (0, 535, 0, 3.293M)
|        (pkts,bits) in = (25.10M, 75.54G), out = (23.14M, 84.72G)
+-> SERVER vs_test   SERVICE http 
    |        PVA acceleration none
    |        (cur, max, limit, tot) = (0, 535, 0, 3.293M)
    |        (pkts,bits) in = (25.10M, 75.54G), out = (23.14M, 84.72G)
    |        requests (total) = 3.280M
    +-> POOL pootest  LB METHOD round robin  MIN/CUR ACTIVE MEMBERS: 0/4
        |        conns (cur, max, limit, tot) = (0, 1085, 0, 2.355M)
        |        (pkts,bits) in = (18.01M, 54.38G), out = (16.52M, 59.32G)
        +-> POOL MEMBER pootest/192.168.161.77:9003  ACTIVE,UP   SESSIONS ENABLED
        |   |        conns (cur, max, limit, tot) = (0, 293, 0, 765800)
        |   |        (pkts,bits) in = (5.865M, 17.70G), out = (5.393M, 19.41G)
        |   |        requests (total) = 765800
        +-> POOL MEMBER pootest/192.168.161.77:9004  ACTIVE,UP   SESSIONS ENABLED
        |   |        conns (cur, max, limit, tot) = (0, 239, 0, 445434)
        |   |        (pkts,bits) in = (3.404M, 10.26G), out = (3.112M, 11.16G)
        |   |        requests (total) = 445434
        +-> POOL MEMBER pootest/192.168.161.78:9001  ACTIVE,UP   SESSIONS ENABLED
        |   |        conns (cur, max, limit, tot) = (0, 194, 0, 401540)
        |   |        (pkts,bits) in = (3.066M, 9.254G), out = (2.799M, 10.01G)
        |   |        requests (total) = 401540
        +-> POOL MEMBER pootest/192.168.161.78:9002  ACTIVE,UP   SESSIONS ENABLED
            |        conns (cur, max, limit, tot) = (0, 359, 0, 742262)
            |        (pkts,bits) in = (5.677M, 17.15G), out = (5.217M, 18.73G)
            |        requests (total) = 742262

 

[root@ltm:Active] config # b self all unit show
SELF IP 192.168.165.250 - unit 0
SELF IP 192.168.163.254 - unit 0
SELF IP 192.168.162.254 - unit 0
SELF IP 192.168.161.248 - unit 0
[root@ltm:Active] config # b self 192.168.162.254 show    
Self IP 192.168.162.254 vlan vlan162
   netmask 255.255.255.0
   floating disabled

分享道
相关新闻